LibreELEC (Krypton) v7.90.007 ALPHA WeTekPlay2 LibreELEC (Krypton) v7.90.007 mSDcard için.. Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! WeTekPlay2 LibreELEC (Krypton) v7.90.007 NAND için... Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! Manual Update from LibreELEC 7.0 or OpenELEC (.tar) Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. !
LibreELEC (Krypton) v8.0.1 RELEASE WeTekPlay2 LibreELEC (Krypton) v8.0.1 mSDcard için.. Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! WeTekPlay2 LibreELEC (Krypton) v8.0.1 NAND için... Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! Manual Update from LibreELEC 7.0 or OpenELEC (.tar) Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. !
LibreELEC (Krypton) v8.0.2 MR by chewitt · May 26, 2017 LibreELEC (Krypton) v8.0.2 MR brings an update to Kodi v17.3, improved support for Intel WIFI and Bluetooth devices, and minor nip/tuck fixes for user-reported issues since v8.0.1. Kodi v17.3 addresses a subtitle (zip file) handling vulnerability that has been widely reported in the media. Changes since 8.0.1 include: Fix for zero byte AddonsXX.db files Fix for connman failing to enable ip_forwarding when using the hotspot feature Fix for minimum Audio Engine sample rate in Kodi (allows forced 48KHz) Fix for suspend issues with CX231xx DVB devices Fix for unreliable 1000-BaseT Ethernet on iMX6 (we default to 100-BaseT) Fix for 720p > 1080p resolution switching on Amlogic aarch64 devices Fix for audio pops on media playback start/stop on Amlogic devices Update timezone data files to 2017b Update to Kodi 17.3 Update to Linux 4.9.29 on Generic and RPi/RPi2 builds Update to Linux 3.14 kernel used on Amlogic aarch64 projects Update to RPi backports and firmwares Update to WeTek DVB firmware on WP2 Add support for multiple Intel WIFI and Bluetooth firmwares Add support for GPIO_SYSFS on RPi/RPi2 Add support for CEC wakeup with LG Simplink devices on Odroid C2 Add support for 050D:010d device to RTL8812AU driver Add lirc support for /dev/rc devices (see note below) See detailed changes on GitHub KODI 17.3 Kodi (Krypton) 17.3 contains several fixes to improve stability and usability. It also contains a notable security fix for an issue with subtitle zip files. Kodi 17.2 had a short lifespan after issues were found in the release. More information can be read in the official Kodi 17.3 release notes. WeTekPlay2 LibreELEC (Krypton) v8.0.2 mSDcard için Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! WeTekPlay2 LibreELEC (Krypton) v8.0.2 NAND için... Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! Manual Update from LibreELEC 7.0 or OpenELEC (.tar) Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! Not.: Şimdi ayarlar eklentisini kullanarak manuel olarak güncelleyebilirsiniz. Otomatik güncelleme ile kullanılabilmesi için 24 saat beklemeniz Gerekir...
LibreELEC (Krypton) v8.1.0 BETA by chewitt · Published August 15, 2017 · Updated August 15, 2017 This is a BETA of our 8.2 release; a mid-year bump to enhance hardware support and capabilities. It adds 10-bit HEVC support for recent Intel GPU generations, Samba 4.6 which brings support for SMB2/SMB3, and several SSL issues are resolved in a switch to OpenSSL. We continue to refine firmware we embed; removing old and unused files to reduce image size while adding new drivers and firmwares based on team findings and user reports. Kodi is updated to 17.4-RC1 with minor bugfixes since v17.3. Changes since LibreELEC 8.0.2 include: Fix NAND install on WeTek Hub/Play 2 after Android Marshmallow updates Update RPi kernel to 4.9.41 Update Generic kernel to 4.11.8 Update from LibreSSL to OpenSSL Update to Samba 4.6.6 Update nVidia main driver to 384.59 Update to lirc 0.9.4d Update linux-firmware and misc-firmware packages Add Virtual project into Generic Add buildsystem changes to make backports from master easier Remove Tvheadend 4.0 server add-on (as superseded by Tvh 4.2) See detailed changes on GitHub WeTekPlay2 LibreELEC (Krypton) v8.1.0 mSDcard için Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! WeTekPlay2 LibreELEC (Krypton) v8.1.0 NAND için... Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! Manual Update from LibreELEC 7.0 , 8.0 or OpenELEC (.tar) Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. !
LibreELEC (Krypton) v8.1.1 BETA BY CHEWITT · SEPTEMBER 1, 2017 This is the second BETA of our 8.2 release; a mid-year version bump to enhance hardware support and capabilities. This beta addresses issues in our OVA image, a Broadcom WIFI firmware vulnerability for Raspberry Pi 3 and Zero W users, and MPEG issues seen with some nVidia cards. It also adds support for the inexpensive Xbox ONE (DVB-C/T/T2) USB tuner (about €12 on eBay), and LibreELEC settings gains new options for changing the embedded Samba server Workgroup and adjusting the SMB protocol versions supported for security and SMB share compatibility. Kodi is bumped to 17.4 final. Changes since LibreELEC 8.1.0 include: Fix VMware OVF template, drop OVA .img suffix and force ‘installer’ mode Update RPi kernel to 4.9.43 Update RPi wifi firmware to resolve CVE-2017-9417 (Broadpwn) Update to Samba 4.6.7 Update to Kodi 17.4 final Update nVidia main driver to 384.69 Update LibreELEC settings add-on to expose more Samba config options Revert Hauppauge DualHD tuner support (back to single-tuner, which works) Add support for Xbox ONE (DVB-C/T/T2) USB tuner See detailed changes on GitHub – and the change summary for LibreELEC v8.1.0 BETA WeTekPlay2 LibreELEC (Krypton) v8.1.1 mSDcard için Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! WeTekPlay2 LibreELEC (Krypton) v8.1.1 NAND için... Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! Manual Update from LibreELEC 7.0 , 8.0 or OpenELEC (.tar) Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. !
LibreELEC (Krypton) v8.1.2 BETA BY CHEWITT · SEPTEMBER 25, 2017 This is the third beta for our 8.2 release. It addresses minor findings related to the Samba bump: we now detect and avoid invalid Samba v3 configurations, old samba.conf.sample templates are overwritten with the new v4 template, and remote SMB shares are mounted using SMB2 or where possible SMB3. The release also adds support for the Raspberry Pi IQAudIO Digi+ board and a Xiaomi BT remote, and includes security fixes for the Blueborne Linux/BlueZ vulnerability. This is hopefully the final 8.1.x beta release; next will be 8.2.0. Changes since LibreELEC 8.1.1 include: Fix boot-time overwrite of samba.conf.sample to ensure v4 template exists Fix Samba startup failures by detecting/disabling old (v3) samba.conf files Fix an issue in the embedded getedid script Fix Kodi to support 352KHz and 384KHz audio over S/PDIF Fix clearing of core files from /storage/.cache during Kodi startup Fix vulnerability (CVE-2017-1000250 aka Blueborne pt.1) in BlueZ Fix vulnerability (CVE-2017-1000251 aka Blueborne pt.2) in all kernels except Amlogic 3.10 Fix a Python /dev/random issue that caused some Python crypto functions to error Fix to prevent boot-loops when a failed update leaves valid files in /storage/.update Update Amlogic 3.14 kernel to use kernel wireless-regdb on all reference devices Update RPi firmware to solve minor CEC button press issues Update nvidia-legacy driver to 340.104 Update RTL8192EU driver Update Samba to 4.6.8 Update kernel to enable SMB2 support (default) and where possible SMB3 Add support for the Xiaomi Mi Box Bluetooth remote Add alsa configuration for the IQAudIO Digi+ on Raspberry Pi devices See detailed changes on GitHub – along with previous changes for LibreELEC v8.1.0 BETA and LibreELEC v8.1.1 BETA releases. WeTekPlay2 LibreELEC (Krypton) v8.1.2 mSDcard için Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! WeTekPlay2 LibreELEC (Krypton) v8.1.2 NAND için... Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! Manual Update from LibreELEC 7.0 , 8.0 or OpenELEC (.tar) Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! ________________________________________________
LibreELEC (Krypton) 8.2.0 RELEASE BY CHEWITT · OCTOBER 28, 2017 LibreELEC 8.2.0 provides a mid-year bump to improve hardware support on Intel and Raspberry Pi hardware. It also resolves minor support issues on a range of devices and fixes a number of important security issues affecting the core OS reported in recent months. Kodi is bumped to 17.5, and Samba bumps to 4.6 which brings support for SMB2/3 to LibreELEC for the first time. PLEASE READ THE RELEASE NOTES below before posting an issue in the forums as there are disruptive changes to Samba, Lirc and Tvheadend. Changes since LibreELEC 8.0.2 include: Fix boot-time overwrite of samba.conf.sample to ensure v4 template exists Fix Samba startup failures by detecting/disabling old (v3) samba.conf files Fix NAND install on WeTek Hub/Play 2 after Android Marshmallow updates Fix VMware OVF template, drop OVA .img suffix and force ‘installer’ mode Fix an issue in the embedded getedid script Fix Kodi to support 352KHz and 384KHz audio over S/PDIF Fix clearing of core files from /storage/.cache during Kodi startup Fix vulnerability (CVE-2017-1000250 aka Blueborne pt.1) in BlueZ Fix vulnerability (CVE-2017-1000251 aka Blueborne pt.2) in all kernels except Amlogic 3.10 Fix a Python /dev/random issue that caused some Python crypto functions to error Fix to prevent boot-loops when a failed update leaves valid files in /storage/.update Update Amlogic 3.14 kernel to use kernel wireless-regdb on all reference devices Update RPi firmware to solve minor CEC button press issues Update RPi wifi firmware to resolve CVE-2017-9417 (Broadpwn) Update wpa_supplicant to resolve multiple CVE’s (KRACK) Update linux-firmware and misc-firmware packages Update nvidia-legacy driver to 340.104 Update nvidia main driver to 384.90 Update RTL8192EU driver Update RTL8188EU driver Update RPi kernel to 4.9.43 Update Generic kernel to 4.11.8 Update from LibreSSL to OpenSSL Update Samba to 4.6.8 Update to lirc 0.9.4d Update Kodi to 17.5.1 Update kernel to enable SMB2 support (default) and where possible SMB3 Update LibreELEC settings add-on to expose more Samba config options Revert Hauppauge DualHD tuner support (back to single-tuner, which works) Add Slice and Slice3 projects Add (merge) Virtual project into Generic Add buildsystem changes to make backports from master easier Add support for the Xiaomi Mi Box Bluetooth remote Add support for Xbox ONE (DVB-C/T/T2) USB tuner Add alsa configuration for the IQAudIO Digi+ on Raspberry Pi devices Add dummy Tvheadend 4.0 add-on to ensure 4.0 is disabled on upgrade See detailed changes on GitHub – along with lesser differences from the 8.1.2 BETA release. !!! SAMBA / SMB CHANGES !!! Samba = server software embedded into LibreELEC images SMB = client protocol used for connecting to Windows Server and Samba shares LibreELEC 8.2.0 includes changes that allow the Kodi SMB client and our embedded Samba server to support SMB2/3 connections; deprecating SMB1 to improve security and performance. This is necessary to cope with changes Microsoft introduced in the Windows 10 ‘Fall Creators Update’ to resolve SMB1 security issues. Please see Microsoft notes here and here and here for an explanation. LibreELEC changes are summarised below: The Kodi SMB client now defaults to SMB3 connections but can fail to negotiate SMB3 with old Samba (NAS) versions. A new option in Kodi Settings > Services > SMB client > allows SMB2 or SMB1 to be forced for compatibility with legacy SMB servers. The embedded Samba server defaults to and supports only SMB2/SMB3 connections. The LibreELEC Settings add-on allows the minimum protocol version to be changed, e.g. to enable SMB1 for compatibility with legacy SMB clients. It also supports GUI configuration of WORKGROUP name. Samba detects v3 /storage/.config/samba.conf configurations and ignores them to avoid the Samba service failing on startup. If this happens Samba starts with a default v4 configuration. Custom Samba configurations must be updated to use the new Samba 4.x base template (samba.conf.sample). Kodi “Windows network browsing” needs the Kodi SMB client to support SMB1 and we now default to SMB2/3 connections so browsing no longer works. Windows SMB share sources must be added using the full server/share path. SMB sources from Samba/NAS devices can normally be browsed via the “ZeroConf network browsing” alternative. Connection failures to anonymous and guest shares on a Windows server are normally solved by creating a local machine user account and password credential on the server for Kodi to use, then setting read or read-write permissions for that credential to the shares Kodi will access. Connection failures from a Windows client to the embedded Samba server are probably the result of Win10 changes that remove support for guest/anonymous access. Enabling password authentication in the LibreELEC settings add-on and setting username/password credentials should restore access. Local filesystem mounts of a remote SMB filesystem via systemd or autostart.sh now default to SMB2 so connections to SMB1 shares fail unless vers=1.0 is added into the mount command to force SMB1. SAMBA / SMB CONFIGURATION FILES Kodi forum posts commonly refer to Samba configuration files in ~/.smb/smb.conf which is common in other Linux distros but is not correct for LibreELEC and Kodi 17.4 or newer. The embedded Samba server obtains the runtime config from /etc/samba/smb.conf unless /storage/.config/samba.conf custom config is present. The Kodi SMB client configuration is stored in /storage/.kodi/.smb/smb.conf which can be extended with changes in /storage/.kodi/.smb/user.conf if required. nb: Changes to smb.conf in the same location will be overwritten by GUI client changes. If you experience issues with SMB shares (client or server) please post in the forums sharing details of the Windows and Samba versions and a Kodi debug log. !! LIRC CHANGES !! In LibreELEC 8.0 the Lirc service is enabled when an IR receiver is detected in the system, but it is not started unless used with the lirc_rpi or lirc_xbox drivers or a personal lircd.conf. In LibreELEC 8.2 the Lirc service is enabled and supports all drivers which can result in the service starting and interfering with normal IR operations. If you experience “double button presses” after updating the Lirc service can be disabled in the ‘Services’ tab of the LibreELEC settings add-on. The Lirc service is disabled in new installations and must be manually enabled. Thanks to @HiasoffT changes the Lirc service is now configurable using a combination of /storage/.config/lirc_options.conf and lircd.conf – the same approach used in desktop Linux distributions and most howto instructions users find via Google searches. !! TVHEADEND CHANGES !! LibreELEC 8.2 does not provide Tvheadend (Server) 4.0 so the add-on repo has been populated with a dummy 4.0 add-on that Kodi will download then mark as broken. It has been discontinued because it is no longer maintained upstream. Tvheadend 4.2 has been available for some time and has proven to be more stable with better features and hardware support. Unfortunately Tvheadend does not provide an automatic upgrade or configuration export/import process so 4.0 users must perform a new installation of Tvheadend 4.2. This is inconvenient, but there is no other option. NB: Existing Tvheadend 4.2 add-on users will see “fail to start” messages after updating to the LibreELEC 8.2.0 release. Once Kodi has started it checks our add-on repo and a new (compatible) version is downloaded and installed. Once the add-on has updated Tvheadend 4.2 will start normally. INTEL HBR AUDIO Initial patches to resolve the lack of pass-through HBR audio on NUC devices and similar with an internal DP > HDMI convertor were published recently. Testing has shown good results on Linux 4.13+ kernels but issues are seen with older Intel/NUC hardware using the 4.11 kernel used in LibreELEC 8.2. As a result these patches are not suitable for the 8.2.0 release and this minor issue will be resolved with LibreELEC 9.0 in the future. AUTO-UPDATE Following a number of significant security issues we need to ensure more users run the latest release to benefit from security bug fixes. LibreELEC 8.2.0 changes the default OS update option from manual to auto-update to ensure maintenance updates, e.g. 8.2.0 to 8.2.1 roll-out faster. Major version updates will remain user-initiated and there are no changes to the 24-hour canary period between a release and update files being distributed via auto-update. WeTekPlay2 LibreELEC (Krypton) v8.2.0 mSDcard için Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! WeTekPlay2 LibreELEC (Krypton) v8.2.0 NAND için... Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! Manual Update from LibreELEC 7.0 , 8.0 or OpenELEC (.tar) Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. !
LibreELEC (Krypton) v8.2.1 MR BY CHEWITT · NOVEMBER 21, 2017 LibreELEC 8.2.1 is a maintenance release that includes Kodi 17.6. It also resolves a minor time-zone issue after recent daylight saving changes, a resume from suspend issue with the Apple IR driver, and it provides two new SMB client configuration options in Kodi settings. You can now set a minimum SMB protocol version to prevent prevent SMB1 from ever being used, and a ‘legacy security’ option forces weak authentication to resolve issues seen with the USB sharing functions on some older router/NAS devices. If updating to LibreELEC 8.2 for the first time PLEASE READ THE RELEASE NOTES below here before posting issues in the forums as there are disruptive changes to Lirc, Samba, and Tvheadend. As Kodi 17.6 has been declared the final Krypton release (no further updates) we also expect LibreELEC 8.2.1 to be the final 8.2 update. The team are now focussed on LibreELEC (Leia) 9.0 development. Changes since LibreELEC 8.2.0 include: Fix issues with the Apple IR driver not working after suspend Fix ‘file exists’ errors with SMB connections to Win10 shares Update Samba to 4.6.10 Update tz-data to 2017c Update Kodi to 17.6 Add SMB client options for minimum SMB protocol Add SMB legacy security option with NTLMv1 and disabled SPNEGO See detailed changes on GitHub. WeTekPlay2 LibreELEC (Krypton) v8.2.1 mSDcard için Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! WeTekPlay2 LibreELEC (Krypton) v8.2.1 NAND için... Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. ! Manual Update from LibreELEC 7.0 , 8.0 or OpenELEC (.tar) Gizlenmiş İçerikGörmek İçin Foruma Giriş Yapınız. !
