- 250 MHz IBM PowerPC Processor (350 Mips) - Linux Operating System - 2 x DVB Common-Interface - 1 x Smartcard-Reader - MPEG2 Hardware decoding - V.24/RS232 Interface - 10/100Mbit compatible Ethernet Interface (only DM5620) - 4-digit 7-segment display - Up to 64 MByte of RAM - unlimited channel lists for TV/Radio - channel-change time < 1 second - full automatic service scan - supports directly bouquet-lists - supports EPG (electronic program guide) - supports multiple LNB-Switching control (supports DiSEqC) - fully adaptable OSD in many languages and skin-support - SPDI/F Interface for digital bit stream out (AC-3 / DTS) - RF - Modulator and Video/Audio-Cinch out - 2 x Scart-interfaces Product | DreamBox DM5600 / DM5620 technical data DBS-Tuner: Frequency Range 950 . 2150 MHz Signal Level - 65 dBm . - 25 dBm Signal-to-Noise Level 12 dB max. DBS-Tuner Input Connector F-Type female Input Impedance 75 Ohm AFC +/- 3 MHz Demodulation Shaped QPSK FEC Viterbi and Reed-Solomon Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation Roll-off Factor 35 % Demultiplexing according ISO 13818-1 Common-Interface: Common-Interface Power Consumption max. 0,3A/5V Video decoder: Video Compression MPEG-2 and MPEG-1 compatible Video Standard PAL G/ 25 Hz Video Formats 4:3 / 16:9 Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart) Letterbox precolating for 4:3 TV-Device Audio decoder: Audiokompression MPEG-1 & MPEG-2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz Output analog: Output Level L/R 0,5 Vss on 600 Ohm THD > 60 dB (1 kHz) Crosstalk < -65 dB Output digital: Output Level 0,5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical (AC3) Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm TV-Scart: Output: FBAS,RGB,S-VHS over OSD selectable VCR-Scart: FBAS Serielle Interface RS 232: Typ RS232 bidirectional Bitrate 115,2 kBit/s max. Plug Connector SUB-D-9 Function: Update of Firmware Ethernet (only DM5620): 10/100 MBit compatible interface Function: Update of Firmware, Connect to PC LNB Power and polarisation: LNB Current 500mA max. ; short-circuit-proof LNB Voltage vertical < 14V without load, > 11,5V at 400mA LNB Voltage horizontal < 20V without load, > 17,3V at 400mA LNB shut-off at Standby-Mode Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control Power consumption: < 20W (in operation, horizontal polarization / 400mA LNB current) < 11W (in operation, without LNB) Input voltage: 230V / 50 Hz alternating acurrent +/- 15% Physical specification: Ambient Temperature +150C...+350C Humidity < 80% Size (W x D x H): 370 mm x 242 mm x 65 mm Weight: 1,0 kg
