CCcam.cfg Dosyası Ve Ayarları

[BOLDPILOT22]

W3 7 den dt leri nasıl yükler ve izlerim yardımcı olabilirmisiniz tşk ler.

örnek cfg:

# cccam team uvadi cccam v1.2.0
#
# special greets go to dale cooper, the rudream and ofcourse hdlteam
#
# for system without new enigma socket.... Capmtserver is your friend ;-)
#
 
 
################################################## ####################
# arkadaslarin veyahut clients f: Satirina yazilacak #
################################################## ####################
# syntax for to add a friend user to cccam with the max up hops limit
# sharing of emus (default = 1), allow emm (default = 1), and optional
# downshare limits per share (default = no limits)
# emus are shared only one level down, even if no limits given
#
f: user password 3 0 0 { 0:0:5 }
 
 
################################################## ####################
# c: Satirinada arkadaslarininki yazilacak cccam server #
################################################## ####################
# syntax for to add a client connection to other cccam
# add yes on end to use friends emus (non public private key/emu,etc...),
# but only works when corresponding f line on server has '1' for <shareemus>
#
#c: <hostname> <port> <username> <password> <wantemus>
#
# example:
#
# c: Someserver.somedomain 12000 user1 pass1
# c: 192.168.1.2 12000 user2 pass2
# connects to cccam without use of friends emus
#
c: ipnummer/dyndns poort user password yes
################################################## #############################
# cccam den harici baska servere lere baglanmak icin 
################################################## #############################
 
################################################## ###
# burayada n: Satiri ekleyerek newcamd/newcs server baglanmak icin
################################################## ###
#n: <ip> <port> <username> <pass> <des(14byte)> <nr_of_hops_away (default: 1)>
#
# example:
#
n: ipnummer/dyndns poort user password deskey
#################################################
# r: Satirida radegast server'e baglanmak icin 
#################################################
#r: <ip> <port> <ca4> <id6> <nr_of_hops_away (default: 1)>
#
# example:
#
r: ipnummer 678 0100 000080
#############################################
# l: Satirida camd3 server'e baglanmak icin
#############################################
#l: <ip> <port> <username> <pass> <ca4> <id6> <nr_of_hops_away (default: 1)>
#
# example:
#
l: ipnummer 567 dummy dummy 0100 000080
################################################## ####################
# other config settings #
################################################## ####################
# server shall listen on this port pro incoming connections
# default port is 12000, disable server with parm -s
#
server lısten port : istediginiz port numarasi standart olan 12000 dir # default is tcp 12000
 
# server can give some info about server and client connections
# and cardinfo
# default port is 16000 voor telnet
# supported commands:
# info
# activeclients
# clients
# servers
# shares
# providers
# entitlements
# example use: Echo servers | telnet localhost 16000
#
#ınfo lısten port : 16000
 
# same info also available in your browser
# go with your browser to http://ip_cccam_server:16001
#html ınfo lısten port : 16001
 
# time in seconds to keep on screen display active.
# default is 0 (turned off)
#
#zap osd tıme : 3
 
# if timing should be shown in osd and debug output
# default is no (turned off)
#
#show tımıng : Yes
# turns debugging on and off
# default is no (turned off)
#
#debug : Yes
# should cccam try to read and parse newcamd.conf for server connections
# default is no (turned off)
#
#newcamd conf : Yes
# configure what emm blocker you want. Add as many as readers you have attached
# default is blocking nothing
#
# b: /dev/sci0 01
# 00 - nothing
# 01 - sa blocked
# 02 - ua blocked
# 04 - ga blocked
# and sum of for combinations
#
#examples
#
#b: /dev/tts/0 07
b: /dev/sci0 00
b: /dev/sci1 00
# disable all client emm globally
# saves lots of cpu, but you won't get any updates anymore
#
# default: No
#
#dısable emm : Yes 
 
# overrule the nds boxkey (4 byte hex)
#
# boxkey: <device> <byte1> <byte2> <byte3> <byte4>
#
#example
#
#boxkey: /dev/sci0 00 11 22 33
 
# what softcam.key should cccam try to read
# defaults to /var/keys/softcam.key
#
softkey fıle : /var/keys/softcam.key
 
 
# what autoroll.key should cccam try to read
# defaults to /var/keys/autoroll.key
#
autoroll fıle : /var/keys/autoroll.key
 
 
# what constant.cw should cccam try to read
# defaults to /var/keys/constant.cw
# file content can be like
#
# ca4:id6:sid4:pmtpid4:ecmpid4:key16(01 02 03...)
#
statıc cw fıle : /var/keys/constant.cw
 
 
# in this file you can configure what caıds cccam should ignore
# defaults to /var/keys/cccam.ignore
# file content can be like
#
# ı: Ca4 id6 ignore allways this caid/ident
# s: Ca4 id6 sid4 ignore caid/ident only on sid
#
caıd ıgnore fıle : /var/keys/cccam.ignore
 
 
# write wrong logins to file
# defaults is off
#
log warnıngs : /tmp/warnings.txt
 
# stealthy login to newcamd/newcs server, identify as mgcamd
# default: No
#
# newcamd stealth : Yes
 
eger gbox ilede baglanmak istiyorsaniz x: line yapmaniz gerek ( cccam 1.7.0 link gbox kullananlar icindir)
ornek:
x: 0100 000000 2 # mediaguard ıssuer 
x: 0500 000000 2 # viaccess ıssuer
x: 0501 000000 2 # art
x: 05ff 000000 2 # art/tps
x: 0502 000000 2 # eurosport/absat
x: 0600 000000 2 # ırdeto ıssuer
x: 0602 000000 2 # pehla/bulsat/c+nl
x: 0604 000000 2 # nova/showtime
x: 0606 000000 2 # *** view
x: 0608 000000 2 # ***tv
x: 0618 000000 2 # xplus
x: 0622 000000 2 # albani/c+nl
x: 0626 000000 2 # redlight/freextv
x: 0d00 000000 2 # cryptoworks ıssuer 

kisi (client) eklemek icin su ayarlari yapmaniz lazim:

F: Isim1 password 2 1 1 { 0:0:2, 100:00006a:1, 1702:0:0 }

isim1 bizim butun local kartlarimizi vede virtual kartlarimizi kullanabilir max dist 2den gelen kartlar
ve isim1 bizdeki emu keysleri kullanabilir kullanmasini istemiyor iseniz bunu 0 yapin.
ve 3'cu 1 ise kartinizi au hakki vermek istemiyor iseniz 0 olacak.
ısim1 butun kartlari 1x daha baskasina iletebilir yani gboxtaki level olayi ama provider 100:00006a olani baskasina iletemez sadece kendisi bakabilir.

Provider 1702 olani ise bakamaz ve baskasinada iletemez.

Simdi gelelim baskasina nasil baglanacak:

C: Dyndns portno isim passwd yes

yes= eger client karsi tarafin emu haklarini kullanmak istiyorsa yes yazmasi lazim.


Port acmak icin cccam.cfg deki port standart 12000 dir bunu istediginiz port ile degisebilirsiniz.

Ama benim testlerim sonucu en iyi ayar soyle eger karsi tarafa kisitlama getirmiyor iseniz:

F: User password 3 0 0 { 0:0:5 }

yani emu keysleri kullanilmayacak cunki herkez keysleri guncellemiyor ve network fazla mekul edilmiyor.

[ı]alıntıdır.[/ı]

[Ertan AKTEPE]

W3 7 den dt leri nasıl yükler ve izlerim yardımcı olabilirmisiniz tşk ler.

Forumumuzda bu tür yerli platform içeren konular yasaktır.
Digiturk izlemek için www.digiturk.com.tr adresini ziyaret ediniz.

[alu777]

Paylasim icin tesekkurler

[noirdesire]

Paylasim icin tesekkurler